Atari Punk Console Bass Version
Using the same PCB as the original Atari Punk
| Item | QTY | Reference | Part |
| 1 | 2 | R1, R2 | 10Ω Resistor, 1kΩ Resistor |
| 2 | 1 | R3 | 39kΩ Resistor |
| 3 | 1 | R4 | 6.2kΩ Resistor |
| 4 | 1 | POT1 | 500kΩB Potentiometer with On/Off Switch |
| 5 | 2 | POT2, POT3 | 500kΩB Potentiometer |
| 6 | 1 | C1 | 82nF Capacitor |
| 7 | 1 | C2 | 0.047μF Capacitor |
| 8 | 1 | C3 | 100μF Electrolytic Capacitor |
| 9 | 1 | D1 | LED or Diode |
| 10 | 1 | U1 | 556 Timer IC |
| 11 | 2 | J1, J2 | 1/4″ Mono Audio Jack |
| 12 | 1 | J3 | 9V Battery Connector |
| 13 | 1 | J4 | DC Adapter Jack |
| 14 | 1 | PCB | Atari Punk Console Printed Circuit Board |
Hello,can you tell me which one is the Atari punk PCB you use, theres to many… is Forrest mims one? thanks
similar, her did come up the circuit
Just completed the bass APC , works a treat , great fun .
Its the second of your kits I’ve built (the delay is the other one)
Both were enjoyable to build and as a novice its given me great confidence
So thanks !
Thanks SimSar!