Very Customizable 8 or 10 Step Sequencer kit with onboard 555 timer to adjust speed. Board allows for LED indicator, on/off switch per step, Reset function (allowing user to reset the sequence to any step). Output to CV.  MADE IN THE USA.  Through hole component mounting with Solder Mask and Screen Print for super easy assembly.  The FULL Kit will produce a functional sequencer and comes with:

-PC Board

-All IC’s

-Diodes

-Resistor

-Capacitor

– 9V Battery Jack

-AC Adapter jack

– 1/8″ CV Out Jack

-On/Off switch

-11 10K Pots (10 for each step and 1 for the clock speed)

-Wire (depending on how you build your case, you may need more wire)

-11 – 1/8″ reset jacks (one for each step and one for the master reset)

-2 – 1/8″ jacks (one for external clock input and one for clock output)

-1 Clock on/off switch

-10 Switches (one for each step)

-11 knobs (10 for each step and 1 for clock pot)

-10 LED’s

-10 470 ohm resistors for LED’s

EVERYTHING YOU NEED!  Just put this into a case of your choice and you are ready to bleep-out!

* 8 Step Sequencer PCBs are currently out of stock.  Check back in 3-5 weeks for a whole new and improved design!